What is it?
Aggregate and marble encased in a clear resin binder bonded to the substrate completely joint free

What can this be laid onto?
The ideal substrate is usually concrete. However, with the right information, Resin Flooring UK are happy to apply this system onto a solid/stable enough bases ensuring no movement beneath. This system can be applied onto marine plywood/floorboards.

How is this applied?
A liquid resin binder is mixed with the aggregate and following preparation this can be applied in one day.

How long does this take to dry?
Drying or curing is dependant upon the temperature. Usually the floor will be tack free after 7 hours and safe to walk on the following day.

Are there fumes/odours?
There are no harmful fumes. Smell from the binder (when wet) is barely noticeable. Tool cleaning is the same as for any painting job, but can be applied outside. The following day all odours will have disappeared.

How do you clean it, especially crevices?
Cleaning is much easier than most other flooring materials. We recommend a wet vacuum every 6 months but in the meantime hoover/wipe down the same way you would a tile using neutral detergents. Please download our cleaning and maintenance document on the web page for the stone carpet flooring range.

How much does it cost?
Completely varies dependant on size area/what we are laying on/preparation works involved etc but you can e mail us for an estimate

Where is suitable to apply this flooring?
Suitable throughout any room in the house or in offices/retail stores etc.

Can it be applied externally? Patio? Driveways?
This internal system is suitable for external use but please refer to our Pebblecrete range for other external solutions.

Can it be sealed?
Yes, however, to retain the natural look of the stones, we prefer to leave this range unsealed. If sealing is preferred it can be sealed with either a matt or gloss finish.

What is it?
Quartz (1-2mm) encased in a clear resin binder bonded to the substrate completely joint free.

What can this be laid onto?
The ideal substrate is usually concrete. However with the right information, The Stone Carpet Company are happy to apply this system onto a solid/stable enough bases ensuring no movement beneath. This system can be applied onto marine plywood/floorboards.

How is this applied?
A liquid resin binder is mixed with the quartz and following preparation this can be applied in one day.

How long does this take to dry?
Drying or curing is dependant upon the temperature. Usually this flooring range can take approximately 3-4 days to install as requires sealing but once sealed you can be back on it the following day.

Are there fumes/odours?
There are no harmful fumes. Smell from the binder (when wet) is barely noticeable. Tool cleaning is the same as for any painting job, but can be applied outside. The following day all odours will have disappeared.

How do you clean it?
Hoover and wipe down the same way you would tiles/carpet using neutral detergents. Please download our cleaning and maintenance document on the web page for details in the quartzscreed flooring range section on website.

How much does it cost?
Completely varies dependant on size area/what we are laying on/preparation works involved etc but you can complete a data sheet on the site- Please note: This website estimate may not be accurate at this time as this page is being redeveloped.

Where is suitable to apply this flooring?
Suitable throughout any room in the house or in offices/retail stores etc.

Can it be applied externally? Patio? Driveways?
This system is suitable for external us and provide safe anti slip environment.

Can it be sealed?
Yes quartzscreed requires sealing either matt or gloss. Can take up to two coats dependent upon absorption.

Can it go round cabinets, baths, sinks?
Any details or trims can be custom designed. Existing features and fittings can be accommodated.

Is it cold under foot?
The resin binding the stone delivers a warm feel making the surface comfortable to bare feet.

Compatible to under floor heating?
Yes suitable for under floor heating can work with water pipes but will need specific specifications from suppliers for us to determine scope our works.

Can you DIY?
Yes we do provide DIY kits and supply materials only. However we recommend this is laid by an experienced floor layer familiar with these systems as we do not provide guarantees when supplying materials alone.

Guarantee for Supply and lay?
Yes we guarantee for 10 years.

What happens if it gets damaged?
We can gently heat resin based flooring enabling us to repair any nick or dents so they can be smoothed back into place.

What is it?
Natural aggregates bonded to a polyurethane base

What can this be laid onto?
The ideal substrate is either concrete or Tarmac.

How is this applied?
A polyurethane resin is applied to the substrate, whilst this is still tacky, natural aggregates are applied to fully blind the resin. The following day all excess aggregate is swept off and the remaining aggregate stays permanently bonded to the resin.

How long does this take to dry?
Drying or curing is dependant upon the temperature. Usually this flooring range can take approximately 2-3 days to install depending on weather conditions and size of area

Are there fumes/odours?
There are no harmful fumes. Smell from the binder (when wet) is barely noticeable. Tool cleaning is the same as for any painting job, but can be applied outside. The following day all odours will have disappeared. As this is an external product any odours are lost in the atmosphere, as these products are all solvent free, there are no environmental issues to worry about either.

How do you clean it?
Can be swept when needed to remove dirt, leaves etc, perhaps once every 3 months a jet wash can be used to remove any ingresses of dirt.

How much does it cost?
Completely varies dependant on size area/what we are laying on/preparation works involved etc but you can e mail us for budget costings.

Where is suitable to apply this flooring?
Applied externally to driveways, paths or patio areas.

Can it be sealed?
No, this system should not require sealing as it can be easily deep cleaned. The use of sealers is not recommended externally due to their poor UV stability and they rarely withstand extremes in the weather.

Can it go round drains, manhole covers etc
Any details or trims can be custom designed. Existing features and fittings can be accommodated.

Can you DIY?
No, due to warranty issues. These products are all specialist systems and is crucial they are laid to specification for it to perform well. We are happy to give quotes, samples and give information pertaining to each of our products to ensure the right system is chosen.

What happens if it gets damaged?
We can gently heat resin based flooring enabling us to repair any nick or dents so they can be smoothed back into place.

What is it?
A cement based system applied onto a concrete substrate(Floors) and plastered walls or plaster board (walls)and sealed with a stone oil to give a silk finish.

What can this be laid onto?
The ideal substrate is concrete base that's structurally sound with no cracking or deformation.

How is this applied?
Powders are mixed with water and either trowelled on to concrete surface by hand or via a pump dependant on the size area. The mix is then finished with a finishing trowel to create the pattern once polished.

How long does it take to dry?
24 hours to fully cure however light traffic can be on the surface the following day.

How do you clean it?
Hoover and wipe down the same way you would tiles/carpet using neutral detergents. Please see our cleaning and maintenance document on the web page for details in the polished concrete flooring range section on website.

How much does it cost?
Completely varies dependant on size area/what we are laying on/preparation works involved etc but you can complete a data sheet on the site-

Where is suitable to apply this flooring?
Suitable throughout any room in the house or in offices/retail stores etc.

Can it be applied externally? Patio? Driveways?
This internal system is not suitable for external use but please refer to our pebblecrete range for external solutions.

Can it be sealed?
Yes, we seal all our Stone floors and Walls to protect them and to add the required finish to the system for our clients.

Can it go round cabinets, baths, and sinks?
Any details or trims can be custom designed. Existing features and fittings can be accommodated.

Is it cold underfoot?
No different to a tiled floor but is compatible to under floor heating.

Compatible to under floor heating?
Yes suitable for under floor heating can work with water pipes but will need specific specifications from suppliers for us to determine scope of works.

Can you DIY?
No, due to warranty issues. These products are all specialist systems and is crucial they are laid to specification for it to perform well. We are happy to give quotes, samples and give information pertaining to each of our products to ensure the right system is chosen.

What happens if it gets damaged?
We can patch repair the system by saw cutting and re-applying.

What is it?
Smooth, glossy resin applied at 2-4mm onto a concrete or marine plywood base delivering both vibrant and neutral colours.

What can this be laid onto?
The ideal substrate is usually concrete however with the right information the stone carpet company are happy to apply this system onto a solid/stable base ensuring no movement beneath this system. We can then apply onto marine plywood/floorboards.

How is this applied?
A liquid self levelling resin trowelled onto the substrate and leveled using a trowel. This system is usually applied in three-four days dependant upon size area and number of rooms.

How long does this take to dry?
Drying or curing is dependant upon the temperature. Usually the floor will be tack free after 12 hours and safe to walk on the following day.

How do you clean it, especially crevices?
Please down load our cleaning and maintenance document on the web page for the smooth resin flooring range.

How much does it cost?
Completely varies dependant on size area/what we are laying on/preparation works involved etc but you can complete a data sheet on the site –

Where is suitable to apply this flooring?
Suitable throughout any room in the house or in offices/retail stores etc.

Can it be applied externally? Patio? Driveways?
Typically, no, as in wet weather would not be slip resistant. For external Areas, please see our Pebblecrete Range.

Can it be sealed?
Yes,can be sealed with a scratch resistant sealant delivering both gloss and matt finish.

Can it go round cabinets, baths, sinks?
Any details or trims can be custom designed. Existing features and fittings can be accommodated.

Is it cold underfoot?
No different to a tiled floor but is compatible to under floor heating.

Compatible to under floor heating?
Yes suitable for under floor heating with water pipes but will need specific specifications from suppliers for us to determine scope our works. We can also provide under floor heating as part of our package.

Can you DIY?
No, due to warranty issues. These products are all specialist systems and is crucial they are laid to specification for it to perform well. We are happy to give quotes, samples and give information pertaining to each of our products to ensure the right system is chosen.

What happens if it gets damaged?
We can gently heat resin based flooring enabling us to repair any nick or dents so they can be smoothed back into place.